Glann Innovations

HOME

CURRENT PARTS -
FRONT CHAIN SLIDE

REAR BRAKE BLOCK OFF PLATE W/ COOLING FINS

REAR CHAIN GUIDE WITH SKID PLATE

REAR CHAIN GUIDE FOR ROCK RINGS OR WITHOUT A SKID PLATE

IN LINE RADIATOR COOLERS

STOCK FRONT HUB TWIN OUTTER BEARING HUB KIT W/ GREASE ZERTS

STOCK BEARING CARRIER TWIN BEARING UPGRADE KIT

STOCK HONDA TRX450ER CARBURETOR HOT START INSTALLATION

STOCK A-ARM GREASE ZERTS

STOCK SWING ARM GREASE ZERTS

STOCK SWING ARM BOLT GREASE ZERT

STOCK BEARING CARRIER GREASE ZERT

REAR CHAIN GUIDE

Why do I need this?

When pushing the throttle the top of your chain gets tight because the direction the front counter is pulling on the chain, allowing the bottom side of the chain to get loose. When a chain gets loose enough the chances are high the chain could come off the rear sprocket and end your day. Glann Innovations rear chain guide captures the chain between the guide and the skid plate and guides the chains into the rear sprocket insuring there is no place for the chain to go but around the rear sprocket.

Installation Tips

Before you install your new REAR CHAIN GUIDE loosen your chain and loosen your skid plate bolts. Install your new rear chain guide and safety wire the mounting bolts together. Then remember to tighten your chain and your skid plate bolts.




Close this window to go back to last visited page.




Thede Web Works