GLANN INNOVATIONS
HomeAbout UsPartnersClientsProductsAdditional ProductsStore

CASE SAVER 
HONDA TRX400 & TRX450R
Glann Innovations Case Saver follows the stator cover profile, guarding your engine case.   It slids over the shift shaft offering additional support.   Also, our Case Saver is longer and eliminates your chain roller, therefore the 8mm bolt can be utilized for added support.  Available for TRX400's & TRX450's. $60

​(Please use all chain guides designed for your quad.  They work in harmony.)
SWINGARM CHAIN SLIDE
HONDA TRX400 & TRX450R

REAR CHAIN GUIDE
HONDA TRX400 & TRX450R
Glann Innovations Products
The Chain Slide fits up against the right of the front sprocket.  This will help fill the gap if the chain were to derail.   Available for TRX400's & TRX450's.   $80

Note Long Travel: If you are using long travel, this part will show more wear than the factory set up.  $80
​ 
​(Please use all chain guides designed for your quad.  They work in harmony.)
The Rear Chain Guide helps guide your chain to keep it in-line with the rear sprocket.  (Most chains come off because the top of your chain is pulled tight from the front counter sprocket and all the slack is on the bottom of the chain.  The bottom of the chain may then come off the sprocket and start the "chain reaction" that could possibly break your engine case.)  Works with most rotor guards.  (Some rotor guards use the same mounting bolt needed to mount this chain guide therefore trimming may be needed.)  Available for TRX450's. 

(Please use all chain guides designed for your quad. They work in harmony.)
BLOCK OFF PLATE
w/ COOLING FINS
This part simply works awesome!  It helps to keep your rear brake and brake fluid cooler. (Customers are reporting using less rear brake pads.) $50                                                                                
Fits all Japanese quads with a parking brake mechanism from 1985 to today.

GREASEABLE 
SWINGARM PIVOT BOLT


If you do not have time to take your Pivot Bolt out and grease it then try this option!  

Available for TRX250R, TRX400EX, TRX450R $55 & YFZ450 Carb or YFZ450 EFI $50 (YFZ's do not come with a nut.) and Raptor 125/250 $60.
Our Case Saver follows the stator cover profile, guarding your engine case.  The Chain Slide fits up against the right of the front sprocket. This will help fill the gap if the chain were to derail.

We created an upper chain roller mount on the EFI Case Saver and included the lower chain roller mount.

Available for YFZ450R EFI model $80 & $60.  

(Please use all chain guides designed for your quad. They work in harmony.)  

CASE SAVER & CHAIN SLIDE
YAMAHA YFZ450 CARB, 
RAPTOR 125 & 250
TIE ROD END
"CASTLE NUT" UPGRADE KIT


Your factory set up only has a stop nut with a cotter pin above it, which only keeps the nut from coming off.  If your nut even comes loose, then the tie rod end is destroying the fit of the hole in the aluminum spindle and your steering stem.  Our kit helps the nut from coming loose.  Available for TRX400EX/X, TRX450R/ER &  TRX 700XX.  $20
BRAKE MOUNTING PLATE


One mounting plate is for the 400EX Rotor with the TRX450R Caliper.  Or we offer a different mounting plate for the TRX250R / TRX450R rotor and TRX450R caliper.  This Rear Brake Mounting Plate has a rotated mounting location for better clearance of your subframe and exhaust.  $80
Our Case Saver follows the stator cover profile, guarding your engine case.  The Chain Slide fits up against the right of the front sprocket. This will help fill the gap if the chain were to derail. 

Available for the YFZ450 Carb & Raptor 125/250.  $60 & $60.   

Note: 2004-2005 Carb models will need an additional Chain Roller Relocation Bracket in order to use our Case Saver.  

(Please use all chain guides designed for your quad. They work in harmony. ) 
CASE SAVER & CHAIN SLIDE
YAMAHA YFZ450R EFI